The air conditioning unit has become one of the essential appliances in any establishment. It helps control the humidity and air temperature indoors, especially during the hot days of summer. But aside from the indoor air situation, homeowners are also concerned about the aesthetics of their home and the comfort and convenience of everyone in the household. So instead of installing the usually noisy window-mounted air conditioning units, the split-type variety like GREE air conditioner has become more preferred by property owners today.
After purchasing your air conditioning unit, you must think about what you need to prepare for the installation process. While the experts will handle the installation task, you still need to think about several key factors to get the optimal benefits of your air conditioner. Here are the things that you need to think about during the installation.
Location of the Units
One of the first steps in preparing for installing your new split-type air conditioner is deciding where to put both the indoor and outdoor components of the unit.
Your indoor component must be located in an area where it can distribute the air evenly. It must also have no barriers to stop the continuous flow of the air. Also, the unit must be wall-mounted and placed at approximately 8-10 feet from the ground but make sure that you can still reach it for easy maintenance. If you plan to install it in your bedroom, it would be best to install it above your bed to get its best cooling effect.
For your outdoor unit, it is recommended to have the split-type GREE air conditioner installed in an open area like the terrace. It will allow the air to flow properly over the condenser and compressor. If you do not have an open space, you may choose an external wall to handle the unit’s weight while facilitating the desired airflow.
Wall Durability
Another important factor to check out before calling the air conditioner installer is the quality of the wall where you plan to mount it. Again, since you have more knowledge about the integrity of your home than the technicians, it would be necessary to pick the wall that can handle the indoor A/C unit.
Keep in mind that installation of split-type aircon on unsteady or weak walls may cause accidental falling. It may also cost you to lose more money if you need to have your A/C unit reinstalled if the original spot has a weak structure. If you are unsure about determining the wall durability in your property, you may ask your builder or look for a wall durability guide.
Space Between Wall and the Unit
When installing the split-type air conditioner, you need to know the space between the wall and the unit.
Experts suggest allowing at least 15 centimetres around the sides and the upper area of the unit. It is necessary to promote the necessary airflow. It is also the same principle when mounting the outdoor unit of your split air conditioner.
Space Between the Indoor and Outdoor Units
To maximise the capability of your split-type air conditioner to provide cooling air, you need to ensure that there is an appropriate distance between the two components.
As much as possible, you need to put a close distance between the two to encourage the faster flow of the coolant from the units. The safest distance between the two must be at least 15 metres or less.
Installing a split-type aircon lets you enjoy cooler and more comfortable air indoors. So make sure that you know how to mount it properly so enjoy its full potential and ensure your safety all the time.
Facebook
Twitter
Instagram
YouTube
LinkedIn
RSS